While investigating mitsubishi reach forklift truck in and around Powys take into account the physical restrictions of the areas in which a machine will have to operate. In particular consider any doorways through which your forklift will have to move. If your doorways are standard 1.8m (6ft) or 2.4m (8ft) high then you obviously wont be able to use a machine with a collapsed mast height of over 3m (10ft). Before making your selection make sure that all the doorways and openings that it will need to fit through have been measured.

When searching for mitsubishi reach forklift truck in and around Powys ensure you get a good demonstration of the machine you are considering, especially if you are looking at a used forklift. Driving a forklift around a car park for a few minutes is not comparable with using it in your warehouse. Arrange for a proper demonstration at your premises for a fixed period of time in order to give you the chance to identify any problems it may have.

While you are researching mitsubishi reach forklift truck in and around Powys check the state of the forks on any second hand forklift you look at. Bent forks may need to be replaced. The best way to check this is simply to put the mast in a vertical position and lower the forks to the floor. Once at the floor use a tape to check that both fork tips are the same height from the ground.